Coarse strainer, cyclonic filter and HEPA- H13 fine filter in the same unit.

Protects the machine from dirt particles and eliminates impurities in the wet air exhaust to the surrounding area in suction drying. High filtration efficiency with HEPA fine filter.

• Filtration efficiency 99.99 % 0.3 microns DOP
• Filtration efficiency min 99.967% of all particles and fibres from mineral wool

Coarse strainer, cyclonic filter and HEPA fine filter in the same unit.

Protects the machine from dirt particles and eliminates impurities in the wet air exhaust to the surrounding area in suction drying. High filtration efficiency with HEPA fine filter.

Filtration efficiency 99.5% of all particles larger than 1 m
Filtration efficiency 99.967% of all particles and fibres from mineral wool

To speed up surface drying of walls, floors and ceilings.

By increasing the air speed in large room volumes using an axial fan at the same time as using a dehumidifier, walls floors and ceilings can be dried more quickly.

The smallest drier unit in the range is CTR 150XT, which is lighter, more silent and more compact.

A high flexibility is achieved thanks to the smart construction and the technical solutions. Different areas can be dried by using the two 50 mm dry air outlets. A hygrostat can be connected to the machine while drying sensitive environments. For the drying of insulation or floating floors, the CTR 150XT is specifically designed to be used in conjunction with CTR T150XT in our program of turbines.

Capacity

+20°C, 60% RF    12 l/day

Dry air volume

125 m3/h

Dry air outlet

Ø 2×50 mm

Wet air outlet

Ø 50 mm

Power supply

230 V / 50 Hz

Regeneration air heater

800 W

Power consumption

875 W

Real consumption

800 W

Noise level (3 m)

55 dB

Weight

11 kg

Dimensions (W x L x H)

260mm x 275mm x 310mm

The most adaptable and popular unit in the range is the CTR 300XT, which is fully portable and compact.

A high flexibility is achieved thanks to the smart construction and the technical solutions. Different areas can be dried by using the two 50 mm and one 100mm dry air outlets. A hygrostat can be connected to the machine while drying sensitive environments. For the drying of insulation or floating floors, the CTR 300XT is specifically designed to be used in conjunction with CTR T300XT in our program of turbines.

Capacity

+20°C, 60% RF    22 l/day

Dry air volume

300 m3/h

Dry air outlet

Ø 1×100 mm, 2×50 mm

Wet air outlet

Ø 75 mm

Power supply

230 V / 50 Hz

Regeneration air heater

1000 W

Power consumption

1215 W

Real consumption

1000 W

Noise level (3 m)

56 dB

Weight

16 kg

Dimensions (W x L x H)

325mm x 325mm x 325mm

The CTR 500XT is the largest drier in the XT range with an impressive capacity for its size and weight.

Due to its 5 Dry air outlets (2×100 mm and 3×50 mm) it can be utilized in different configurations. The CTR 500XT offers maximum flexibility for all types of water damages and humidity problems. For drying of insulation where high pressure is needed the CTR 500XT can be used in conjunction with 2 CTR T200 Turbines.

Capacity

+20°C, 60% RF    38 l/day

Dry air volume

500 m3/h

Dry air outlet

Ø 2×100 mm, 3×50 mm

Wet air outlet

Ø 75 mm

Power supply

230 V / 50 Hz

Regeneration air heater

1500 W

Power consumption

1780 W

Real consumption

1500 W

Noise level (3 m)

62 dB

Weight

21 kg

Dimensions (W x L x H)

385mm x 370mm x 360mm

Dehumidifier + turbine in one unit. Extremely low noise level.

In our continuous endeavour to stay one step ahead, we have complemented our Combi-series with CTR K50XT/K100XT/K150XT. A unit which can be used either for suction drying or for injection drying of insulation in buildings.

Capacity

+20°C, 40% RF    22 l/day

Dry air volume

80 m3/h

Pressure

200 mbar

Power supply

230 V / 50 Hz

Power consumption

1200 W

Noise level

43-47 dB

Weight

28 kg

Dimensions, Inc. cart (H x B x D)

625mm x 350mm x 280mm

For drying joists, insulation etc.

HP 2000XT is a robust radial fan for drying surface material, framed constructions and insulation. It has outlets of Ø 100 mm and Ø 50 mm that allow an efficient air pressure in the water-damaged spaces. Operating time meter and two speeds, 500 respectively 1500 m3/h. At 500 m3/h the noise level is low.

K2 is a robust and rigid condensing dryer specifically designed to meet the professional user requirements. It has very low noise level during operation and is silent during transportation.

K2 has high capacity and low energy consumption thanks to a design optimized for normal conditions (20°C, 60% RH), rotary compressor and electronically controlled hot-gas defrosting.

K2 is a highly flexible machine with 5 different operational modes and thermostat controlled 1,5kW heater. It can be equipped with bucket or pump for continuous operation.

K2 is easy to operate and handle with big wheels, good balance, has lots of gripping possibilities and is stackable.

The filter is easily changed in a matter of seconds and the hood can be folded forward for easy access during cleaning and service.

Compact – very quiet – easy to transport – automatic pump out – easy to maintain.

Designed for use in residential areas, emergency situations or where space is at a premium. The condensing drier KNUT has a high capacity at a low power consumption.

Dehumidifier + turbine in one unit. Extremely low noise level.

In our continuous endeavour to stay one step ahead, we have complemented our Combi-series with CTR K50XT/K100XT/K150XT. A unit which can be used either for suction drying or for injection drying of insulation in buildings.

Capacity

+20°C, 40% RF    35 l/day

Dry air volume

150 m3/h

Pressure

260 mbar

Power supply

230 V / 50 Hz

Power consumption

1600 W

Noise level

44-49 dB

Weight

49 kg

Dimensions, Inc. cart (H x W x D)

840mm x 405mm x 400mm

• A compact and light filter unit for cleaning large volumes of air.
• H13 classed, filtration efficiency exceeds 99.95% up to 1080m3/h.
• Direct connectivity with high pressure fan HP2000XT.
• Carbon filter for reducing bad odours.

Flexifilter HEPA H13 can be combined with all Corroventa turbine and combi models when suction drying.

Adsorption drier with air cooled condenser Ideal for emergency damages and the drying of buildings.

• Automatically pumps out condensed water.
• Also works at low temperatures.
• Adds approx. 3 kW of heat to the room.

Capacity

+20°C, 60% RF    20 l/day

Dry air volume

450 m3/h

Cooling air volume

550 m3/h

Total air volume

1000 m3/h

Power consumption

1780 W

Real consumption

ca 1500 W

Power supply

230 V / 50 Hz

Weight

47 kg

Coarse separator –Water separator – Hepa filter.

For our product program for Kombi and turbine systems we have developed a 3 stage system filter for particles, fibre and water separation when suction drying floating constructions. Automatic machine control when pumping out water.

Max. pump height

3,5 m

Capacity

25 l/min

Power supply

230 V / 50 Hz

Weight

35 kg

Height incl. cart 500 mm
Width incl. cart 350 mm
Length incl. cart 400 mm

Low noise level and efficient drying of insulation, floating floors etc.

The T100, T150 and T200S units are specially constructed for use in occupied living accommodation where the minimum noise pollution is necessary. Flexible combination possibilities with the CTR dehumidifiers ensures the best possible configuration.

Flexible and user friendly for pressure or suction drying.

The hoses are equipped with pipe bends or T-connection which are pushed into pre-drilled holes. The rubber cuff seals tightly between the hole and the protrusion. Installation of the hose system is with connectors that give fast, simple and sealed installation.

Flexible and user friendly for pressure or suction drying.

Installation of the C16 hose system is with 10 outlets and gives fast, easy and sealed installation.
A complete set is supplied in a bag containing:

• 1x Junction with 10x outlets including covers
• 50m Hose Ø16mm
• 10x Pipe bends incl. connection and rubber cuff
• 2x T-pipes incl. connection and rubber cuff

• High capacity thermo-desiccant dryer
• Energy re-use through patented heat exchanger solution
• 12kW extra heater in Dry-Air-Outlet
• 32 A Power supply (Dryer) + when necessary 32 A Power supply (Extra heater)
• Maximum airflow 4000 m3/h
• Can be towed with Category B driving license
• Easy to maneuver manually

Power supply 3-phase Dehumidification

400V 32A

Power Supply 3-phase Extra heater(when needed)

400V 32A

Power consumtion Dehumidification

17.5 kW

Power consumption Extra heater (when needed)

12.0 kW

Maximum airflow

4 000 m3/h

Capacity (20°C, 80% RH)

400 l/dag

Dimensions (W x L x H)

200cm x 410cm x 190cm

Weight

N/A

10000m3/h dry air. Mounted on a trailer the CTR 10000 is ideal for combating the initial chaos after massive water damages.

Power supply

3 ~ 400 V 63 A

Power consumption

36,2 kW

Dry air – 1 fan

5000 m3/h 2,2 kW

Dry air – 2 fans

10000 m3/h 4,4 kW

Reg-air

1800 m3/h 0,75 kW

Reg-power – one heater

15,5 kW

Reg-power – two heaters

31,0 kW

Capacity

+20°C, 80% RF    875 l/day

Dimensions (H x B x L)

1.8m x 1.7m x 3m

Weight

1080 kg

Weight with trailer

1560 kg

Sice incl. trailer width 2.33 M
Sice incl. trailer Length 4.85 M
Sice incl. trailer height 2.2 M